Serving the Gainesville area  ·  (352) 450-6430  ·  Open Mon-Sat 7am-6pm
📞 (352) 450-6430 Free Quote

Spray Foam Insulation in Starke, FL (32091) · Local Professionals

Gainesville Spray Foam Insulation · Fast response in Starke and the Gainesville area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+36Verified Reviews
14Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Starke sits at the heart of Bradford County with a mix of older in-town homes on crawl spaces and newer slab-built construction spreading toward the county line. The humidity here never really lets up, and attics that pull in hot damp air all summer long are the reason cooling bills climb fast.

Homeowners in Starke (32091) call Gainesville Spray Foam Insulation when a room over the garage won't cool down, when an attic smells musty or shows signs of moisture, or when the ductwork running through the attic space is losing conditioned air to the heat outside. We have served Starke and the surrounding Gainesville area since 2012, and our team knows the building stock here: the crawl space homes that need rim joist sealing, the older block construction with settled attic insulation, and the newer subdivisions where bigger attic volumes drive up the work needed to keep temperatures even.

Spray Foam Insulation in Starke (32091)

Starke's older in-town homes often sit on crawl spaces with bare or poorly insulated subfloors and rim joists that leak air straight into the living space above. The newer homes on the outskirts are built on slab, but many have attics loaded with ductwork and original fiberglass batts that have compressed flat over the years. In this climate zone, hot and humid most of the year, moisture moves inward through walls and ceilings, and vented attics pull in damp air that condenses on cool surfaces, wetting down insulation and driving mold growth. Spray foam stops that moisture infiltration cold. It seals the air leaks that fiberglass misses, it creates a thermal break that keeps condensation from forming, and it holds its R-value year after year instead of settling flat like blown-in fiberglass does.

Our team has been spraying attics, crawl spaces, rim joists, and closed walls across Alachua County and into Bradford County for over a decade. We know Starke's housing stock, the access challenges in tight crawl spaces and older attics, and exactly what thickness and R-value the code requires at your address. We come to your property fully insured, we measure the space on site, we give you a written estimate with R-value and thickness specifications, and we spray it right.

Our services in Starke

How a Job Works in Starke

First, we schedule a free on-site assessment. We walk your attic, crawl space, or closed wall cavity with you, we measure what has to be sprayed, we check for moisture or contamination that has to be addressed before foam goes in, and we answer your questions about open cell versus closed cell, about R-value and thickness, and about cost. We leave you with a clear written estimate that names the R-value, the foam thickness, and the total price for your property.

On the day of the work, our crew arrives with the spray rig and all safety gear. If there is old insulation that has to come out first, we remove it and haul it away. We set up mechanical ventilation to move fumes out of the space during application. We spray the foam in controlled passes at the thickness specified in your estimate, we verify the ratio and temperature are correct, and we leave the space to cure. For homes that are occupied, we provide a re-entry window of twenty-four to forty-eight hours, and we post clear instructions on your property so you know when the space is safe to re-enter.

When we are done, we clean up all equipment and debris, we walk through the finished work with you, and we leave your property the way we found it. No mess, no lingering odor, and a sealed attic or crawl space that will hold its value for decades.

Pricing for spray foam in Starke depends on the area to be sprayed, the R-value and thickness you need, whether you are using open cell or closed cell foam, and whether old insulation has to be removed first. A typical attic spray foam job in Starke runs from $1.50 per square foot for open cell foam, with closed cell starting around $1.20 per board foot. Crawl space sealing often runs $2,500 and up, depending on the size and whether the rim joist, band joist, and subfloor all need attention. Rim and band joist sealing alone can start at $650. Wall injection foam for closed walls without cavity insulation runs from $2 per square foot. If you have old or contaminated insulation that has to come out, removal starts at $950, and a full replacement with new foam starts at $2,800. The best way to know what your job will cost is to call us at (352) 450-6430 for a free estimate. We will come to your Starke property, measure the space, and give you a firm price in writing with all the specs you need to make the decision.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Starke and nearby areas.

I have an older home in town on a crawl space. What does spray foam do for a crawl space, and why should I bother sealing it?
Crawl spaces in Starke pull in moisture from the ground and the humid air above, and that moisture travels up through rim joists, band joists, and subfloor into your living space. It makes the floor cold in winter, it drives up cooling bills in summer as humid air infiltrates the house, and it creates the damp conditions that lead to mold and wood rot. Spray foam on the rim joist and band joist, and often on the subfloor and foundation walls, seals those air leaks and breaks the moisture path. Your floors will be warmer, your indoor humidity will drop, and your bills will come down. We start at $650 for rim and band joist sealing, and crawl space jobs typically run $2,500 and up depending on the size.
My attic smells musty and I can see discoloration on the insulation. Can I just spray foam over it, or do I have to remove it first?
If the insulation is wet, moldy, or contaminated, we do not spray over it. We remove it first, we let the framing dry completely, and then we spray the foam. Trying to seal in moisture is a recipe for failure. We will inspect your attic at no charge, we will tell you honestly whether the insulation has to come out, and if it does, we will give you a price for removal and replacement. Removal starts at $950, and we will make sure the space is dry and ready before any foam goes in. Call us at (352) 450-6430 to schedule that assessment.
What is the difference between open cell and closed cell foam, and which one should I use in my Starke home?
Open cell foam is softer, more flexible, and less expensive. It starts around $0.55 per board foot. It is a good choice for attics and vented spaces where vapor permeability matters and where you do not need the extra R-value per inch. Closed cell foam is denser, it has a higher R-value per inch, and it provides a vapor barrier. It starts around $1.20 per board foot. Closed cell is the right choice for crawl spaces where moisture control is critical, for rim joists, for metal buildings, and for any space where you want maximum performance in a tight area. In Starke's humid climate, closed cell is often the better call for crawl spaces and rim joists. Open cell works fine for attics if the space is vented and dry. We will recommend the right foam for your application and your budget when we visit your property.
Who sets the R-value and thickness requirements for my Starke home, and do I need a permit?
The Florida energy code and the building code in force at your address set the R-value minimum for attics, walls, and crawl spaces. The City of Starke building department is the authority on what applies to your property, and they also govern permits and inspections. Ignition barriers and thermal barriers are code requirements too, and they vary by location. We help you understand what the code requires at your address, and we work with the Starke building department on permits if they are required. The best practice is to call the Starke building department directly and ask what applies to your job, and then call us at (352) 450-6430 so we can make sure our estimate meets those requirements.
We are living in the house during the work. How bad is the smell, and how long before we can use the attic or rooms above it?
Spray foam has a strong chemical smell during application and cure. We run mechanical ventilation during the spray to move fumes out of the house and away from your neighbors. We will tell you to keep windows and doors closed in the area being sprayed, and we will post a re-entry window of twenty-four to forty-eight hours before you or your family should occupy rooms above the work or spend time in the attic. After forty-eight hours, the foam is cured and the smell fades fast. If you have pets or young children, let us know when we visit so we can plan the work around your schedule. Call (352) 450-6430 to discuss timing.
Are you fully insured for spray foam work in Starke?
Yes. We carry full general liability and workers' compensation insurance. When you call for an estimate, we are happy to provide proof of coverage. You can also ask any contractor you hire to show you current insurance documentation before work begins. It is a smart question to ask.
When is the best time of year to spray foam an attic or crawl space in Starke?
Spring and fall are ideal because temperatures are mild and humidity is a bit lower. Summer in Starke is hot and humid, which can make the cure time longer and the work harder on the crew. Winter is mild here, so it is workable, but the long humid summers are when cooling bills spike and when moisture problems show up most clearly. If your attic or crawl space is already showing signs of moisture or condensation, or if your cooling bills are climbing, do not wait for fall. Call us at (352) 450-6430 and we will assess the problem. Many jobs can be done quickly, and the sooner you seal the leaks, the sooner your bills start coming down.
Why choose us?

Trusted professionals since 2012

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Gainesville

All your work handled by qualified professionals in Gainesville

Attic Spray Foam Insulation

Attic foam sized for Gainesville's long hot cooling season

Included in your service

  • Roof deck foam sealed against Alachua County's hot attic air
  • Soffit and ridge vents closed for the unvented attic approach
  • Ductwork pulled inside the envelope near Haile Plantation homes
  • Built for Gainesville's humid year-round climate
Learn more→

Closed Cell Spray Foam Insulation

Dense foam for Gainesville's humid, storm-prone summers

Included in your service

  • Applied to rim joists in mid-century Alachua County homes
  • Vapor-resistant layer for Gainesville's humid air
  • Used on block walls common across Gainesville neighborhoods
  • Rated for hurricane season wind-driven moisture
Learn more→

Open Cell Spray Foam Insulation

Open cell fill for new builds across Newberry and Haile Plantation

Included in your service

  • Fills wall cavities in new Haile Plantation two-story builds
  • Expands to seal gaps in Newberry subdivision framing
  • Dampens sound between floors in larger Alachua County homes
  • Fits irregular framing in Gainesville's older additions
Learn more→

Wall & Injection Foam Insulation

Injection foam for Gainesville's uninsulated block walls

Included in your service

  • Drilled into mid-century block walls near downtown Gainesville
  • Fills cavities without disturbing original block facades
  • Targets older homes in the Duckpond and surrounding blocks
  • Cuts summer heat gain through Alachua County block walls
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for Gainesville's humid older homes

Included in your service

  • Foam sealed across crawl space walls near the Duckpond
  • Band joist coverage for aging University-area rentals
  • Vapor barrier work laid over bare Gainesville crawl subfloors
  • Blocks humid air rising into older Alachua County floors
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist sealing for Gainesville's humid foundation gaps

Included in your service

  • Sealed along slab-foundation rim joists in Newberry builds
  • Closed at crawl space band joists near the Duckpond
  • Blocks humid Alachua County air at the foundation line
  • Reduces drafts in mid-century Gainesville block homes
Learn more→

Garage Spray Foam Insulation

Garage foam for hot rooms-over-garage in Haile Plantation

Included in your service

  • Ceiling foam applied under rooms-over-garage near Newberry
  • Wall foam added in attached garages across Alachua County
  • Cuts summer heat transfer into Haile Plantation bonus rooms
  • Air sealing at garage penetrations for Gainesville homes
Learn more→

Metal Building & Barndominium Spray Foam

Foam insulation for Alachua County metal buildings

Included in your service

  • Applied to steel interiors on Alachua County barndominiums
  • Stops condensation drip common in humid metal structures here
  • Covers purlins and panels in rural Alachua County buildings
  • Built for Gainesville's long hot and humid stretch
Learn more→

Commercial & New Construction Spray Foam

New construction foam for Gainesville-area builders

Included in your service

  • Coordinated with framers on Haile Plantation subdivisions
  • Scheduled around pour timelines for Newberry slab builds
  • Covers commercial shells across Alachua County
  • Planned insulation stage for new UF-area student housing
Learn more→

Insulation Removal

Removing old attic insulation from Gainesville block homes

Included in your service

  • Cleared from attics in mid-century Alachua County homes
  • Removed ahead of rental turnover near the University of Florida
  • Hauled out compacted fiberglass common in older Gainesville attics
  • Checked for moisture damage from humid vented attics
Learn more→

Insulation Replacement & Re-Insulation

Re-insulating Gainesville attics with foam built for the heat

Included in your service

  • New foam fitted after removal in Gainesville attics
  • Matched to block or frame homes across Alachua County
  • Sealed against humidity pulled in by vented attics here
  • Finished to suit rentals near the University of Florida
Learn more→

Air Sealing

Air sealing against Gainesville's year-round humidity

Included in your service

  • Top plates sealed in mid-century Alachua County homes
  • Ductwork chases closed against humid vented attic air
  • Checked with a blower door test for Gainesville's climate
  • Targets drafts common in older Duckpond-area rentals
Learn more→
Verified client reviews

36+ Verified Client Reviews in Gainesville

⭐⭐⭐⭐⭐ 4.9/5 · 36 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Gainesville · Response within 24h · No commitment · ☎ (352) 450-6430

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Gainesville ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm